You can sync your URC 4 remote, often referred to as the "Blue Remote", to your TV so you can control functions like volume, settings, and input.


Instructions

Auto Program

To sync your remote to your television automatically, do the following:

  1. Press and hold the TV key for 5 seconds. The light under the button will turn on.
  2. Press the Power key once.
  3. Aim the remote at the TV and press the Channel Up or Channel Downbuttons to begin the channel scan. The remote will start searching for codes in 5 second intervals.
    • If the remote reaches the end of the codes, the TV button will blink 7 times.
  4. Press the OK key immediately after the TV turns off.
  5. Test by pressing the Powerbutton on your remote to turn your TV on.
    • If the TV did not power on, repeat the steps above to try again.


Manual Program

To sync your remote to your television manually using a device code, do the following:

  1. Press and hold the TV key for 5 seconds. The light under the button will turn on.
  2. Enter the four-digit code for your device. The TV button should blink twice if entered correctly. (Codes can be found in the document attached to this article.)
  3. Test by pressing the Powerbutton on your remote to turn your TV off.
    • If the TV did not power off, repeat the steps above with the next available TV code in the list.