You can sync your URC2025 remote, often referred to as the "Green Remote", to your TV so you can control functions like volume, settings, and input.


Instructions

Auto Program

To sync your remote to your television automatically, do the following:

  1. Press and hold Setup until the LED in the button blinks twice. 
  2. Press the TV key.
  3. Press and hold the OK key until your TV turns off.
  4. Release the OK key immediately after the TV turns off.
  5. Test by pressing the Powerbutton on your remote to turn your TV on.
    • If the TV did not power on, repeat the steps above to try again.


Manual Program

To sync your remote to your television manually using a device code, do the following:

  1. Press the TV key.
  2. Press and hold Setup until the TV LED in the button blinks twice. 
  3. Enter the code for your TV brand. (Found in the document attached to this article.)
  4. Test by pressing the Powerbutton on your remote to turn your TV on.
    • If the TV did not power on, repeat the steps above with the next available TV code in the list.


Additional Resources

Check this website for step-by-step instructions and additional codes that may not be found in this article: Universal Electronics - Eclypse URC2025